392 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com

Cables

RTSI Bus Cables (See Figures 7 and 8)

Use RTSI bus cables to connect timing and synchronization signals among

measurement, vision, motion, and CAN boards for PCI. For systems using long and

short boards, order the extended RTSI cable.

2 boards ..........................................................................................................776249-02

3 boards ..........................................................................................................776249-03

4 boards ..........................................................................................................776249-04

5 boards ..........................................................................................................776249-05

Extended, 5 boards ........................................................................................777562-05

SH68-68-D1 Shielded Cable (See Figure 9)

Shielded 68-conductor cable terminated with two 68-pin female 0.050 series D-type

connectors. This cable connects counter/timer devices to accessories.

1 m ..................................................................................................................183432-01

2 m ..................................................................................................................183432-02

R6868 Ribbon I/O Cable (See Figure 10)

68-conductor flat ribbon cable terminated with two 68-pin connectors. Use this

cable to connect the NI PCI-6601 to an accessory. For signal integrity with high-

frequency signals, use the SH68-68-D1 with the NI 6602 and NI 6608.

1 m ..................................................................................................................182482-01

Custom Connectivity Components

68-Pin Custom Cable Connector/Backshell Kit (See Figure 11)

68-pin female mating custom cable kit for use in making custom 68-conductor

cables. Solder-cup contacts are available for soldering of cable wires to the connector.

68-pin custom cable kit ................................................................................776832-01

PCB Mounting Connectors

Printed circuit board (PCB) connectors for use in building custom accessories that

connect to 68-conductor shielded and ribbon cables. Two connectors are available,

one for right-angle and one for vertical mounting onto a PCB.

68-pin, male, right-angle mounting..............................................................777600-01

68-pin, male, vertical mounting ....................................................................777601-01

Counter/Timer Accessories and Cables

Figure 10. R6868 Ribbon I/O Cable

Figure 9. SH68-68-D1 Shielded Cable

Figure 8. Extended RTSI Bus Cable

Figure 7. RTSI Bus Cable

Figure 11. 68-Pin Custom Cable Kit