AC ELECTRICAL CHARACTERISTICS (continued)

Symbol

Parameter

Test Condition

Min.

Typ.

Max.

Unit

Output Enable to Output

(see figure 4B)

Ω

5

µs

5

µs

150

µs

150

µs

Propagation (see figure 4C)

Ω

0.3

0.9

µs

0.3

0.9

µs

LINE TRANSIENT IMMUNITY (Considering the following cases: Powered ON, Powered OFF-Low im-

pedance power supply and Powered OFF-High impedance supply).

ESD

Elettrostatic Discharge

Tested per MIL-STD-883

(see note 6)

2KV

EOS

Electrical Overstress

Transient pulse both polarities

for 100

µs (see note 7)

50

V

Note 3: The output leakage is measured under the following conditions:

a) The Driver tristated

b) Power supply OFF, and the power pins shorted to Ground

c) Power supply OFF. Impedances between power pins open and power pins shorted to Ground.

Note 4: The output waveform should not show any signs of oscillations under any load variation between o.1VVss and 0.9Vss. The oscillation

Note 6: All pins are required to withstand parameter.

Note 7: Output pins are required to withstand fig.5 without any degradation to the circuit.

TEST CIRCUIT

L5170

4/9