2/22/22, 11:54 AM

Switchcraft : Specification

https://www.conxall.com/Specification.aspx?Parent=792

2/2

Salt Spray: Meets MlL-STD-202, method 101.

 

MATERIAL

 

Housing, Plugs and Male Receptacles: Copper alloy, nickel-plated. Female

Receptacle–Die-cast zinc, nickel-plated.

Black Tini Q-G® Housing: Copper alloy, black chrome-plated.

Pin and Socket Contacts: Copper alloy, silver-plated.

Flex Relief: Molded black thermoplastic elastomer.

Latch Button: Molded black thermoplastic.

Release Lever and Mounting Washer: Steel, nickel-plated.

Standoff/Ground Terminal and Cable Clamp: Steel, electrotinned.

Inserts and Insulating Spacer: Molded, high strength thermoplastic

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

 

SPECIFICATIONS (6 – 8 Cord Mount and all Receptacles and Adapters):

 

ELECTRICAL

 

Contact Resistance: .010 ohm maximum after life.

Current Rating (Carry only): 1.5A, 125 VAC, based on 30° maximum

Insulation Resistance: 510,000 M O minimum @ 500 VDC (initial).

Dielectric Strength: 250 V rms.

 

MECHANICAL

 

Life: 2,000 operations

Insertion/Withdrawal Forces (after life): –13 pound insertion; –13 pound maximum

withdrawal

Solderability Standard: Meets EIA RS-186-9E.

Wire Size: 28 wire gauge stranded.