TEK.COM 13

2461 SourceMeter® SMU Instrument

General Characteristics (default mode unless specified)

Factory Default

Standard Power-Up

SCPI Mode.

Source Output Modes

Fixed DC Level, Memory/Configuration List (mixed function), Sweep (linear and logarithmic), Sweep (dual

linear and dual logarithmic.

Memory Buffer

>2 million readings, user adjustable. Includes selected measured value(s) and time stamp.

Real-Time Clock

Lithium battery backup (3 yr.+ battery life).

Remote Interfaces

GPIB

IEEE-488.2.

USB Device

(rear panel, type B)

2.0 Full Speed USBTMC.

USB Device

(front panel, type A)

USB 2.0, support for thumb drives.

Ethernet

RJ-45 (10/100BT)

Digital I/O Interface

Lines

6 Input/Output user defined for digital I/O or triggering.

Connector

9-pin female D.

Input Signal Levels

0.7 V (maximum logic low), 3.7 V (minimum logic high).

Input Voltage Limits

–0.25 V (Abs. minimum), +5.25 V (Abs. maximum).

Maximum Source Current

+2.0 mA @ >2.7 V (per pin).

Maximum Sink Current

–50 mA @ 0.7 V (per pin, solid-state fuse protected).

5 V Power Supply Pin

Limited to 500 mA @ >4 V (solid-state fuse protected).

Handler Interface

Start of test, end of test, 4 category bits.

Programmability

SCPI or TSP command sets.

TSP Mode

Embedded Test Script Processor (TSP) accessible from any host interface.

IP Configuration

Static or DHCP.

Expansion Interface

The TSP-Link expansion interface allows TSP enabled instruments to trigger and communicate with

each other.

LXI Compliance

1.5 LXI Device Specification 2016.

Display

5 inch capacitive touch, color TFT WVGA (800×480) with LED backlight.

Input Signal Connections

Front: Banana. Rear: Mass termination screw terminal.

Interlock

Active High Input.

Cooling

Forced air, variable speed.

Over Temperature Protection

Internally sensed temperature overload puts unit in standby mode.

Power Supply

100 V to 240 V RMS, 50–60 Hz (automatically detected at power up).

VA Rating

350 volt-amps max.

Altitude

Maximum 2000 meters above sea level.

EMC

Conforms to European Union EMC Directive.

Safety

Compliance with CE and NRTL listed to UL61010-1 and UL61010-2-30. Conforms with European Union

Low Voltage Directive.

Vibration

MIL-PRF-28800F Class 3 Random.

Warm-Up

1 hour to rated accuracies.

Dimensions

With bumpers and handle: 106 mm high × 255 mm wide × 425 mm deep (4.18 in × 10.05 in × 16.75 in).

Without bumpers and handle: 88 mm high × 213 mm wide × 397 mm deep (3.46 in × 8.39 in × 15.63 in.)

Weight

With bumpers and handle: 4.75 kg (10.5 lbs.).

Without bumpers and handle: 4.55 kg (10.0 lbs.).

Environment

Operating: 0°–50 °C, 70% R.H. up to 35 °C. Derate 3% R.H./°C, 35°–50 °C.

Storage: –25 °C to 65 °C.