User Manual

8 of 24

Version 1.0

2017-11

SPOC (TM)+2 User Manual

Multichannel SPI High-Side Power Controller

Figure 8

– SPOCTM+2 - Application - Start Installation



The installation will start, after that click „finish“

Figure 9

– SPOCTM+2 - Application – Finish

1.2.2

µIO-Stick Driver Install

After installing the SPOCTM+2-Application keep the Software-USB plugged in and plug in the µIO-Stick.

In order to use the virtual COM-port (neccesairy for the application) go to https://www.ehitex.de/usb-

application-sticks/infineon/2529/uio-stick, scroll to Available Downloads and select Download uIO Updater

(zip file) see Figure 10. Extract the zip file and run UpdatePEK afterwards.

Figure 10 - µIO-Updater (for vCOM)

1.3

Setup Hardware



Plug the SPOCTM+2 DB onto the SPOCTM+2 MB (see Figure 11)