Os motores de busca de Datasheet de Componentes eletrônicos
  Portuguese  ▼
ALLDATASHEETPT.COM

X  

L99MH98 Folha de dados(PDF) 55 Page - STMicroelectronics

Nome de Peças L99MH98
Descrição Electrónicos  Automotive octal half-bridge pre-driver
PDF  147 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrônico  STMICROELECTRONICS [STMicroelectronics]
Página de início  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

L99MH98 Folha de dados(HTML) 55 Page - STMicroelectronics

Back Button L99MH98 Datasheet HTML 51Page - STMicroelectronics L99MH98 Datasheet HTML 52Page - STMicroelectronics L99MH98 Datasheet HTML 53Page - STMicroelectronics L99MH98 Datasheet HTML 54Page - STMicroelectronics L99MH98 Datasheet HTML 55Page - STMicroelectronics L99MH98 Datasheet HTML 56Page - STMicroelectronics L99MH98 Datasheet HTML 57Page - STMicroelectronics L99MH98 Datasheet HTML 58Page - STMicroelectronics L99MH98 Datasheet HTML 59Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 55 / 147 page
background image
6.4.6
First SPI access at power-up scenario
•
Frame 1
–
SDI:
◦
Bit 23 = 0 or 1 (read or write command on the OpCode)
◦
Bit 22 = Not used
◦
Bits 21 to 16 = Address of the register to read or write
◦
Bits 15 to 1 = Data to write (if write command was chosen) or all ‘0’ (if read command was
chosen)
◦
Bit 0 = Parity bit
–
SDO:
◦
Bit 23 = 1 (SPI error or RESET event in the previous access)
◦
Bit 22 = GSBN bit (1 = No fault)
◦
Bits 21 to 16 = Address of the STATUS register
◦
Bits 15 to 1 = Data value of the STATUS register
◦
Bit 0 = Parity bit
Figure 38. First SPI access at power-up scenario
At power-up the status register
value is with bit15 set to ‘1’
After the end of first valid SPI
access the bit 15 of status
register is set to ‘0’
Data on SDO during first access after power-up will be
always the value of STATUS register
SPI Error or RESET
In this case 1 means: reset before this access
6.4.7
Access while an internal fault happens scenario
•
Frame n
–
SDI:
◦
Bit 23 = 0 or 1 (read or write command on the OpCode)
◦
Bit 22 = Not used
◦
Bits 21 to 16 = Address of the register to read or write
◦
Bits 15 to 1 = Data to write (if write command was chosen) or all ‘0’ (if read command was
chosen)
◦
Bit 0 = Parity bit
–
SDO:
◦
Bit 23 = 0 (no SPI error or RESET in the previous access)
◦
Bit 22 = GSBN bit (1 = No fault)
◦
Bits 21 to 16 = Address of the register selected in the previous frame (n-1)
◦
Bits 15 to 1 = Data value of the register selected in the previous frame (n-1)
◦
Bit 0 = Parity bit
L99MH98
Serial peripheral interface (SPI)
DS14611 - Rev 3
page 55/147



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


Folha de dados Download

Go To PDF Page


Ligação URL



ALLDATASHEET é útil para você?  [ DONATE ] 

Sobre Alldatasheet   |   Publicidade   |   Contato conosco   |   Privacy Policy   |   Link para a ficha técnica    |   roca de Link   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com