Page <14>

V1.1

09/09/19

Soft Termination Standard voltage Soft Termination Multilayer

SMD Ceramic Capacitor

NP0, X7R, X5R & Y5V Dielectrics, 0402 to 1812 Sizes, 6.3V to 100V, (MCSHSeries)

Newark.com/multicomp-pro

Farnell.com/multicomp-pro

Element14.com/multicomp-pro

Constructions:

No.

Name

NPO, X7R, X5R, Y5V

1

Ceramic material

BaTiO

3 based

2

Inner electrode

Ni

3

Termination

Inner layer

Cu

4

Middle layer

Ni

5

Outer layer

Sn

Storage and handling conditions

(1) To store products at 5°C to 40°C ambient temperature and 20 to 70%. related humidity conditions.

(2)Theproductisrecommendedtobeusedwithinoneyearaftershipment.Checksolderabilityincaseofshelflife

extensionisneeded.

Cautions:

a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store

thecapacitorsintheambienceofcorrosivegas(e.g.,hydrogensulfide,sulfurdioxide,chlorine,ammoniagasetc.)

b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability.

c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct

sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or

dewingcondition.Tostoreproductsontheshelfandavoidexposuretomoisture.

Recommended Soldering Conditions:

The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against

lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and

concentration of N

2 within oven are recommended.

RecommendedreflowsolderingprofileforSMT

process with SnAgCu series solder paste.

RecommendedwavesolderingprofileforSMT

process with SnAgCu series solder.