5332/3 6Gbps Dual Drive Carrier

Single Slot 3U VPX Board

Block Diagram and Environmentals

Storage

VITA

Environmental

General

The 5332/3 are 5HP single slot 3U VPX storage modules supporting

dual SATA III 6Gbps drives.

Input / Output

The 5332/3 can be directly attached to a host single board computer or

it can be used as part of an extensible multi-slot storage array when used

in conjunction with one of Elma’s 3U VPX control / carrier cards; the 4

port SATA II controller / carrier model, 5330/1 or our 8 port SATA III

controller / carrier.

Compatibility

The 5332/3 are directly compatible with 3U VPX systems including sin-

gle board computers with 1 or 2 external SATA ports, system backplanes

and chassis.

Power Requirements

Typical Power +3.3 @ 200ma (533x only)

Media power not included

Media +5 or +3.3 up to 5W per drive

Standard Operating Temp:

0°C to 55°C

Extended Operating Temp:

-40 to +85 Convection 5332

-40 to +75 Conduction 5333

Non-operating:

-40 to +95C

Operating Shock (SSD only):

40 Gs half-sine wave (11ms)

Operating Vibration (SSD only): 2 Gs from 15 to 2000 Hz

Humidity:

5 to 95%, non-condensing

All configurations of the 5332/3 family are RoHS compliant.

Consult Sales for -40 to +80 Conduction option

5332/3 6Gbps Dual Drive Carrier_Rev2_0514

Y / N

xxxG

xxxT

Example

064G = 64GB drive

500G = 500GB drive

012T = 1.2TB drive

B = primary and secondary side covers for

conduction or convection cooled versions,

5HP configuration is standard

Order Information

2.5” Drive capacity both drives same capacity *

REDI Side Covers standard configuration includes

primary and secondary covers**as standard)

Conformal Coating

533

54

72

00 (solid state drive)

Drive RPM

• RSD= standard duty rotating

• RED= enhanced duty rotating

• RXD= extended duty rotating

• SSS= commercial solid state SLC

• SSM= commercial solid state MLC

• STS=extended temp solid state SLC

• STM=extended temp solid state MLC

2.5” Drive Type

S = 0°C to +55°C

E = -40C to see above

O = Other

Temperature Requirements

2 = air cooled (faceplate)

3 = conduction cooled (no faceplate)

Air or conduction cooled

Y/N

Signal ground isolation (Some applications may

require signal ground isolation)supplied as standard)

*Consult Elma for the complete range of available drive capacities.

**Standard configuration includes 5HP with REDI covers and offset faceplate

Standard configuration includes dual drives.

The model description on all quotes must include any other specific drive

attributes necessary to fulfilling the application requirement.

PCIe to

4 - Port SATA

Controller

88SE6440

Elma Electronic Inc. • 510.656.3400 • sales@elma.com • www.elma.com

Buffer

Circuitry

Backplanes available for our 3U VPX storage products.

Note, the 5332/3 does not support IPMI