Wiring Diagram

The following image shows a suggested connection method. You may use any Digital I/O pin that is

not in use by another device.

NOTE: In the sample code below Digital pin 11 is in use, you may either change your wiring or

change the sample code to match.

Sample Code

IR Receiver test code:

/*

* IRremote: IRrecvDemo - demonstrates receiving IR codes with IRrecv

* An IR detector/demodulator must be connected to the input RECV_PIN.

* Version 0.1 July, 2009

* Copyright 2009 Ken Shirriff

* http://arcfn.com