PAXUSB datasheet(22/32 Pages) REDLION

22 / 32 page

PAXC & I: SETPOINT RESET WHEN SPn+1 DEACTIVATES

PAXC & I: SETPOINT RESET WHEN SPn+1 ACTIVATES









Select , so the setpoint output will deactivate (reset) when SPn +1

activates. (Example: SP1 deactivates when SP2 activates and SP4 when SP1

activates.) The last setpoint will wrap around to the first.









Select , so the setpoint output will deactivate (reset) when SPn +1

activates and then times out (deactivates). This function may only be used if the

SPn+1 is programmed for Setpoint Action of . (Example SP1 deactivates

when SP2 is activated and then times out.) The last setpoint will wrap around

to the first.









(For Reverse Action, The Alarm state is opposite.)

LOW ACTING WITH NO DELAY

LOW ACTING WITH DELAY

HIGH ACTING WITH TIMEOUT

LOW ACTING WITH TIMEOUT

HIGH ACTING WITH NO DELAY

HIGH ACTING WITH DELAY

PAXC & I: SETPOINT RESET WITH DISPLAY RESET









Select , so the setpoint output will deactivate (reset) when the Setpoint

Assignment () counter display resets. The only exception is if the

assigned counter is reset by a Counter Auto reset generated by another setpoint.





PAXR & I: SETPOINT (ALARM) FIGURES FOR RATE

PAXUSB Folha de dados(PDF) 22 Page - Red Lion Controls. Inc