Application information

L6206

20/29

DocID07617 Rev 4

It is also possible to parallel the four half-bridges to obtain a simple half-bridge as shown in

Figure 17. In this configuration the overcurrent threshold is equal to twice the minimum

threshold set by the resistors RCLA or RCLB in Figure 17. It is recommended to use

RCLA = RCLB.

The resulting half-bridge has the following characteristics:



Equivalent device: half-bridge



RDS(ON) 0.075. typ. value at TJ = 25 °C



5.6 A max. RMS load current



11.2 A max. OCD threshold

Figure 17. Paralleling the four half-bridges (with reference to 24-pin packages)