NB681- 28V, 6 A, HIGH-CURRENT SYNCHRONOUS BUCK CONVERTER WITH 2-BIT VID

NB681 Rev. 1.04

www.MonolithicPower.com

3

12/28/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2017 MPS. All Rights Reserved.

ABSOLUTE MAXIMUM RATINGS (1)

Supply voltage (VIN) .................................... 28 V

VSW (DC)...........................................-1 V to 26 V

VSW (25 ns)....................................-3.6 V to 28 V

VBST ................................................... VSW +4.5 V

IEN............................................................100 µA

All other pins ..............................-0.3 V to +4.5 V

Continuous power dissipation (TA = +25°C)

(2)

QFN-13 (2mm x 3mm).............................. 1.8 W

Junction temperature ................................150

C

Lead temperature .....................................260

C

Storage temperature................ -65

C to +150C

Recommended Operating Conditions

(3)

Supply voltage (VIN) .......................4.5 V to 24 V

Supply voltage (VCC) ...................3.15 V to 3.5 V

Enable current (IEN)....................................50 µA

Operating junction temp. (TJ). .. -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN-13 (2mm x 3mm)............ 70 ...... 15...

C/W

NOTES:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ(MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD(MAX)=(TJ(MAX)-

TA)/θJA. Exceeding the maximum allowable power dissipation

produces an excessive die temperature, causing the regulator

to go into thermal shutdown. Internal thermal shutdown

circuitry protects the device from permanent damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.