HIP4080A

FN3658 Rev.8.00

Page 16 of 19

Dec 11, 2019

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please visit our website to make

sure you have the latest revision.

DATE

REVISION

CHANGE

Dec 11, 2019

FN3658.8

Removed retired parts.

Added Revision History section.

Updated POD M20.3 to the latest revision. Changes are as follows:

Rev 2. - Removed “u” symbol from drawing (overlaps the “a” on Side View).

Rev 3. - Top View:

Corrected "7.50 BSC" to "7.60/7.40" (no change from rev 2; error was introduced in conversion)

Changed "10.30 BSC" to "10.65/10.00" (no change from rev 2; error was introduced in conversion)

Side View:

Changed "12.80 BSC" to "13.00/12.60" (no change from rev 2; error was introduced in conversion)

Changed "2.65 max" to "2.65/2.35" (no change from rev 2; error was introduced in conversion)

Changed Note 1 from "ANSI Y14.5M-1982." to "ASME Y14.5M-1994"

Updated to new POD format by moving dimensions from table onto drawing and adding land pattern

Updated disclaimer.