Please note, these miniature displays are very delicate and require care to avoid ripping the delicate

flex connector. These are best used by electronics geeks who have experience and are comfortable

working with delicate electronic components. WE CANNOT REPLACE DAMAGED DISPLAYS if

you are not careful and rip the flex connector!



Technical Details

o

Power with 6-12VDC only into onboard buck converter

o

50mA power draw at 12V, 120mA at 5V

o

Control board measures 48mm x 32mm

o

Four 3mm drill holes on a 43mm x 28mm square

o

Visible display dimensions: 40.672mm x 30.48mm

o

Resolution: 320 x 240

o

Dot Pitch: 0.0635mm wide x 0.127mm high

o

Display metal case dimensions: 46.1mm x 40.96 x 2.53mm

                              Engineered in NYC Adafruit ® https://www.adafruit.com/product/911 6‐28‐17