© TT electronics plc

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

NPN Phototransistor

OP804SL, OP805SL, OP830SL

OP800WSL, OP801WSL, OP802WSL, OP830WSL

Obsolete (OP800SL)

TT Electronics | OPTEK Technology

2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200

www.ttelectronics.com | sensors@ttelectronics.com

Rev C

05/2022

Page 3

Absolute Maximum Ratings (TA = 25° C unless otherwise noted)

Storage Temperature Range

-65

o C to +150o C

Operating Temperature Range

-65

o C to +125o C

Collector-Base Voltage (applies to OP800SL only - does not apply to OP800WSL)

30 V

Collector-Emitter Voltage

OP800 (SL, WSL)

OP830 (SL, WSL)

30 V

15 V

Emitter-Base Voltage (applies to OP800 (SL, WSL) only)

5 V

Emitter-Collector Voltage (applies to all OP800 and OP830 devices)

5 V

Continuous Collector Current

50 mA

Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron]

260° C

(1)

Power Dissipation

250 mW

(2)

Electrical Specifications

Notes:

1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied

to the leads when soldering.

2. Derate linearly 2.5 mW/° C above 25° C.

3. Junction temperature maintained at 25° C.

4. Light source is an unfiltered tungsten bulb operating at CT = 2870 K.

=

=

=