D-33

E3FS

Specification of the E3FS types

DC Switching Models

Item

Emitter

E3FS-10LB...

Receiver

E3FS-10DB4...

Method of detection

Single beam

Power supply voltage

12 to 24V DC +/- 10% (ripple (p-p) 10%)

Current consumption (max.)

50 mA

25 mA

Rated sensing distance

10 m (Function reserve: +20%)

Standard object

Opaque 11 mm min.

Operation angle

+/- 5° (at 3 m)

Response time

2.0 ms

Control output

Transistor output PNP or NPN 100 mA max residual voltage: 2 V max at 100 mA

(for PNP and NPN type)

Test input (Emitter)

E3FS-10B___

(PNP)

Vcc to Vcc-2,5 V : Emitting OFF (Sink current: 3 mA max.)

Open or 0 to 2,5 V: Emitting ON (Leakage current: 0,1 mA max.)

Mode selection input (Receiver)

Connection to Vcc: Light ON (ON when incident)

Connection to 0 V: Dark ON (ON when interrupt)

Power reset time

100 ms

Ambient illumination

Incandescent lamp: 3000 lx max. Sunlight: 10000 lx max.

Ambient temperature [9]

Operating: -25 to 55°C; Storage: -30 to 70°C

Ambient humidity

Operating: 35% to 95%; Storage: 35% to 95%

Insulation resistance

20 M

W min. at 500 V DC between current carrying parts and case

Dielectric strength

1000 V AC, 50/60 Hz for 1 min between current carrying parts and case

Vibration

resistance

Durability

10 to 55 Hz, 1.5 mm double amplitude, each X, Y, Z direction 2 hours

Operation limit

10 to 55 Hz, 0,7 mm double amplitude, each X, Y, Z direction 50 min

Shock resistance

Durability

500 m/s² (approx. 50 g) each X, Y, Z directions for 3 times

Operation limit

100 m/s² (approx. 10 g) each X, Y, Z directions for 1,000 times

Enclosure ratings

IP67

Light source

Infrared

Indicators

Emitter: Orange / Light emission

Receiver: Green / ON-state, Red / OFF-state

Sensitivity adjustment

Fixed

Connection method

2 m pre-wired cable or connector

Operation mode

Light-ON or Dark-ON selectable by wiring

Weight for set

Plastic case

Metal case

Pre-wired cable models:

Approx. 150 g

Approx. 205 g

Connector models:

Approx. 55 g

Approx. 125 g

Circuit protection

Output short-circuit and power supply reverse polarity

Housing materials

Plastic, Nickel brass