The Embedded I/O Company

TAMC260

PMC-Carrier for AMC

Application Information

The TAMC260 is a standard Mid-Size/Full-Size AMC

module that provides one slot for a single-width PMC

module used to build modular, flexible and cost effective I/O

solutions for applications in process control, medical

systems, telecommunication and traffic control.

32 bit PCI accesses are supported on PCI bus with PCI

frequency 33 MHz and also 66 MHz. The PLX8112 PCIe-to-

PCI bridge provides the real connection between primary

PCIe link and the secondary PMC slot. The bridge controls

all PCI accesses and the frequency for the PMC access.

The TAMC260 supports front panel I/O, alternatively a

68 pin SCSI-V type connector provides access to the PMC

P14 back I/O lines.

The TAMC260 is a versatile solution to upgrade well known

legacy I/O solutions to a high performance form factor.

According to AMC.0, the TAMC260 provides an IPMI

compliant Module Management Controller (MMC) with

temperature monitoring and hot-swap support.

Technical Information

 Form Factor: PICMG AMC.1 Module

 Board size: 180.6 mm x 146.5 mm

 Double-width / Mid-Size or Full-Size

 PCIe single lane (1x) port (AMC.1 Type 1 compliant)

 IPMI support

 Front Panel LEDs:

 Blue Hot-Swap LED

 Red Power Good LED (LED1)

 Green PMC-Present LED (LED2)

 One PMC site conforming to PMC standard (IEEE

1386.1)

 Front panel I/O

 P14 back I/O via a 68 pin SCSI-V type connector

 PCI 3.0 compliant interface

 PCI Interface: 33/66 MHz; 32 bit

 5V and 3.3V PCI I/O signaling voltage possible

 Operating temperature -40°C to +85°C

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-09-20

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com