DSP56303 datasheet(43/292 Pages) FREESCALE

Nome de Peças	DSP56303

Descrição Electrónicos	DSP56303 USER?셎 MANUAL

PDF	292 Pages

Scroll/Zoom	100%

Fabricante Electrônico	FREESCALE [Freescale Semiconductor, Inc]

Página de início	http://www.freescale.com

Logo

43 / 292 page

JTAG/OnCE Interface

DSP56303 User’s Manual, Rev. 2

Freescale Semiconductor

2-19

Input/Output

Input

Debug Event

Provides a way to enter Debug mode from an external command

controller (as input) or to acknowledge that the chip has entered

Debug mode (as output). When asserted as an input,

DE causes

the DSP56300 core to finish the current instruction, save the

instruction pipeline information, enter Debug mode, and wait for

commands from the debug serial input line. When a debug request

or a breakpoint condition cause the chip to enter Debug mode

DE is

asserted as an output for three clock cycles.

DE has an internal

pull-up resistor.

DE is not a standard part of the JTAG Test Access Port (TAP)

Controller. It connects to the OnCE module to initiate Debug mode

directly or to provide a direct external indication that the chip has

entered the Debug mode. All other interface with the OnCE module

must occur through the JTAG port. This input is 5 V tolerant.

Table 2-16. JTAG/OnCE Interface (Continued)

Signal Name

Type

State During

Reset

Signal Description

DSP56303 Folha de dados(PDF) 43 Page - Freescale Semiconductor, Inc