AMMP-5024 datasheet(2/11 Pages) AVAGO

2 / 11 page

Table 2. DC Specifications

(Vdd = 7V, Vg2 = Open, TA = 25°C, otherwise specified)

Symbol

Parameters and Test Conditions

Unit

Minimum

Typical

Maximum

Vdd

Recommended Drain Supply Voltage

Idd

Total Drain Supply Current (Vg set for typical Idd)

200

First Gate Voltage (Vdd = 7V, Idd = 200mA)

-2.5

-3.0

-3.5

Idss

Saturated Drain Current (Vg = 0V)

350

Idsmin (Vg)

First Gate Minimum Drain Current (Vg = -7V)

qch-b

Thermal Resistance []

°C/W

4.5

Note:

1) Channel-to-board Thermal Resistance is measured using Infrared Microscopy method.

Table 3. RF Specifications [1]

(Freq = 22GHz, Vdd = 7V, Idd = 200mA, TA = 25°C, Zin = Zo = 50Ohm)

Symbol

Parameters and Test Conditions

Unit

Minimum

Typical

Maximum

Gain

Small Signal Gain [2]

2.5

4.8

6.5

ISO

Reverse Isolation

RLin

Input Return Loss

RLout

Output Return Loss

Noise Figure

4.6

PdB

Output Power at dB Gain Compression

dBm

OIP3

Output 3rd Order Intercept Point [3]

dBm

Notes:

1) Specifications are derived from measurements in a 50 Ohm test environment. Aspects of the amplifier performance may be improved over a

narrower bandwidth by application of additional conjugate, linearity, or low noise matching.

2) All tested parameters guaranteed with measurement accuracy ± 0.5 dB for gain.

3) RFin1 = RFin2 = -5 dBm, Freq = 22GHz, Df = 100MHz

Table 4. RF Specifications [1]

(Freq = 22GHz, Vdd = 4V, Idd = 160mA, TA = 25°C, Zin = Zo = 50Ohm)

Symbol

Parameters and Test Conditions

Unit

Minimum

Typical

Maximum

Gain

Small signal Gain

ISO

Reverse Isolation

RLin

Input Return Loss

RLout

Output Return Loss

Noise Figure

4.6

PdB

Output Power at dB Gain Compression

dBm

OIP3

Output 3rd Order Intercept Point [3]

dBm

8.5

Notes:

1) Specifications are derived from measurements in a 50 Ohm test environment. Aspects of the amplifier performance may be improved over a

narrower bandwidth by application of additional conjugate, linearity, or low noise matching.

2) RFin1 = RFin2 = -5 dBm, Freq = 22GHz, Df = 100MHz

AMMP-5024 Folha de dados(PDF) 2 Page - AVAGO TECHNOLOGIES LIMITED

AMMP-5024 Folha de dados(HTML) 2 Page - AVAGO TECHNOLOGIES LIMITED

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Folha de dados Download

Ligação URL