 2004-2024 Microchip Technology Inc. and its subsidiaries

DS20001894D-page 15

MCP2122

4.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings†

Ambient Temperature under bias ............................................................................................................-40°C to +125°C

Storage Temperature ..............................................................................................................................-65°C to +150°C

Voltage on VDD with respect to VSS ........................................................................................................... -0.3V to +6.5V

Voltage on RESET with respect to VSS ...................................................................................................... -0.3V to +14V

Voltage on all other pins with respect to VSS .................................................................................. -0.3V to (VDD + 0.3V)

Total Power Dissipation (1) ...................................................................................................................................800 mW

Maximum Current out of VSS pin...........................................................................................................................500 mA

Maximum Current into VDD pin .............................................................................................................................500 mA

Input Clamp Current, IIK (VI < 0 or VI > VDD)

 20 mA

Output Clamp Current, IOK (V0 < 0 or V0 > VDD)

 20 mA

Maximum Output Current sunk by any Output pin..................................................................................................25 mA

Maximum Output Current sourced by any Output pin.............................................................................................25 mA

Note 1: Power Dissipation is calculated as follows: PDIS = VDD x {IDD –

 IOH} +  {(VDD – VOH) x IOH} + (VOL x IOL)

† Notice: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions

above those indicated in the operation listings of this specification is not implied. Exposure to maximum

rating conditions for extended periods may affect device reliability.