| Os motores de busca de Datasheet de Componentes eletrônicos |
|
TC7109CPL Folha de dados(PDF) 13 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
TC7109CPL Folha de dados(HTML) 13 Page - Microchip Technology |
|
13 / 30 page ![]() © 2006 Microchip Technology Inc. DS21456C-page 13 TC7109/A FIGURE 3-5: TC7109A RC Oscillator With OSCILLATOR SELECT input LOW, two on-chip capacitors and a feedback device are added to the oscillator. In this configuration, the oscillator will oper- ate with most crystals in the 1MHz to 5MHz range, with no external components (Figure ). The OSCILLATOR SELECT input LOW inserts a fixed 458 divider circuit between the BUFFERED OSCILLATOR OUTPUT and the internal clock. A 3.58MHz TV crystal gives a division ratio, providing an integration time given by: EQUATION 3-1: FIGURE 3-6: Crystal Oscillator The error is less than 1% from two 60Hz periods, or 33.33msec, which will give better than 40dB, 60Hz rejection. The converter will operate reliably at conver- sion rates up to 30 per second, corresponding to a clock frequency of 245.8kHz. When the oscillator is to be over driven, the OSCILLA- TOR OUTPUT should be left open, and the over driving signal should be applied at the OSCILLATOR INPUT. The internal clock will be of the same duty cycle, fre- quency and phase as the input signal. When the OSCILLATOR SELECT is at GND, the clock will be 1/58 of the input frequency. FIGURE 3-7: TC7109A Handshake with Send Input Held Positive 23 OSC OUT 25 Buffered OSC OUT 24 OSC SEL V+ or Open 22 OSC IN R C FOSC = 0.45/RC t = (2048 clock periods) = 33.18 msec 58 3.58 MHz 23 OSC OUT 25 Buffered OSC OUT 24 OSC SEL GND V+ 22 OSC IN 58 Clock Crystal ÷ = Three-State High-Impendance Integrator Output Data Invalid Data Valid Internal Clock Internal Latch Status Output Mode Input Internal Mode Send Input CE/LOAD HBEN High Byte Data LBEN Low Byte Data = Don't Care = Three-State will Pull-up UART Norm Terminates UART Mode Zero Crossing Detected Zero Crossing Occurs Send Sensed Send Sensed Mode Low, not in Handshake Mode Disables Outputs CE/LOAD, HBEN, LBEN Mode High Activates CE/LOAD, HBEN, LBEN |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |