MFS5600AMBAFES datasheet(36/118 Pages) NXP

Nome de Peças	MFS5600AMBAFES

Descrição Electrónicos	Automotive buck regulator and controller with voltage monitors and watchdog timer

PDF	118 Pages

Scroll/Zoom	100%

Fabricante Electrônico	NXP [NXP Semiconductors]

Página de início	http://www.nxp.com

Logo

36 / 118 page

NXP Semiconductors

FS5600

Automotive buck regulator and controller with voltage monitors and watchdog timer

A frequency watchdog monitors the external clock at the SYNCIN pin. If the external clock is not present or

invalid, the device automatically switches to the internal clock. The device switches back to the external clock if

the frequency watchdog detects a valid input.

When the external clock is selected, the switching regulators should be set in PWM mode at the application

level to ensure clock synchronization.

14.6 SYNCOUT function settings

The GPIO2 pin may be configured as SYNCOUT via OTP by setting OTP_GPIO2_CFG[1:0] = 0b10. When

configured as SYNCOUT, GPIO2 outputs the clock that the SW1 regulator uses (in terms of phasing and

frequency) in a push-pull mode railing to VDDIO and ground.

FS5600

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 29 April 2024

36 / 118

MFS5600AMBAFES Folha de dados(PDF) 36 Page - NXP Semiconductors