SL2S3003TT datasheet(55/82 Pages) NXP

55 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

8.5.3.14 LOCK EAS

Command code = A4h

The LOCK EAS command locks the current state of the EAS mode and the EAS ID. If the EAS mode is

password protected, the EAS password must be transmitted first with the SET PASSWORD command.

The timing of the command is write alike.

Option 0 (Option flag not set) is supported.

Option 1 (Option flag set) is supported.

Setting the OTP_EAS_LOCK bit to 1 with a WRITE CONFIG command to block 30 of the configuration memory

also locks the EAS mode and the EAS ID. See Table 9 and Table 30.

SOF

Flags

LOCK EAS

IC Mfg code

UID

CRC16

EOF

8 bits

64 bits optional 16 bits

Table 96. LOCK EAS request format

SOF

Flags

Error code

CRC16

EOF

8 bits

16 bits

Table 97. LOCK EAS response format when Error_flag set

SOF

Flags

CRC16

EOF

8 bits

16 bits

Table 98. LOCK EAS response format when Error_flag NOT set

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

55 / 82

SL2S3003TT Folha de dados(PDF) 55 Page - NXP Semiconductors

SL2S3003TT Folha de dados(HTML) 55 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

Folha de dados Download

Ligação URL