ams Datasheet

Page 11

[v1-08] 2017-Aug-28

Document Feedback

TSL2584TSV − Digital Interface

Interface and control of the device is accomplished through a

two-wire serial interface to a set of registers that provide access

to device control functions and output data. The serial interface

is compatible with the I²C bus, Fast-Mode. The device offers

three slave addresses that are selectable via an external pin

(ADDR SEL). The slave address options are shown in Figure 14.

Figure 14:

Slave Address Selection

Note(s):

1. The slave addresses are 7 bits. A read/write bit should be appended to the slave address by the master device to properly

communicate with the slave device.

ADDR SEL Terminal Level

7-BIT Slave Address

GND

0101001

0x29

Float

0111001

0x39

VDD

1001001

0x49

Digital Interface