Page 1 of 3

JAN 29, 2023

Rev (-)

Doc: A.C HEAT EXCHANGER

Cham,

www.enercon-europe.com

Netanya, www.enercon.co.il

Gurgaon, www.mpsindia.in

Switzerland

sales@enercon-europe.com

Israel

sales@enercon.co.il

India

sales@mpsindia.in

ENERCON P/N M

1

-

3003

Cooling unit with fans

Specifications and Parameters

This indoor fan cooling unit uses a forced convection cooling method, specifically designed for simultaneous

testing of several products using an adaptable plate.

With two 120 x 120 mm fans in parallel, which provide a combined flow rate of 180 CFM, heat dissipation can be

up to 0.4 kW with an average base plate temperature rise1 of 11.2 °C, and thermal resistance of 0.0280 °C/W.

Design Features

•

High thermal performance cooling unit

•

Enables simultaneous testing of several products.

•

Adaptable design:

o

Cold plate can be replaced by the user.

o

Cold plate design is adapted according to the customer's specific heat dissipation requirements.

o

Cooling unit length2.

o

Custom machining and mounting design according to requirements (holes, threads, clearances, etc.)

•

Fans selection according to customer request and needs (PWM control, AC\DC fans, fan size, etc.)

•

Maximum weight :15.5[KG]

•

Fan working temperature -10 to +70 [°C]

•

Maximum recommended environment temperature @ 0.4 [Kw] power dissipation: 50[°C]

•

CFD Analysis

1 Tested with inlet air temperature of 25 °C.

2 length change will influence the performance curves.

Mechanical Overview

• Cooling unit features:

o

Removable cold plate - tapped according to customer requirements.

o

Handles.

o

Removable fans.

• Fans located at the center of the unit - designed to create homogeneous base plate temperature.

• Aluminum structure coated according to customer definitions.

1. Air tunnel cover

2. Removable cold plate

3. Power dissipation devices