DM0 MixRack Getting Started Guide

3

AP10972 Issue 3

IMPORTANT - Read before starting

Safety instructions

Before starting, read the Important Safety Instructions printed on the sheet supplied with the equipment.

For your own safety and that of the operator, technical crew and performers, follow all instructions and heed

all warnings printed on the sheet and on the equipment panels.

System operating firmware

The function of the dLive MixRack is determined by the firmware (operating software) that runs it. Firmware

is updated regularly as new features are added and improvements made.

 Check www.allen-heath.com for the latest version of dLive firmware.

Software licence agreement

By using this Allen & Heath product and the software within it you agree to be bound by the terms of the

relevant End User Licence Agreement (EULA), a copy of which can be found at www.allen-

heath.com/legal. You agree to be bound by the terms of the EULA by installing, copying, or using the

software.

Further information

Please refer to the Allen & Heath website for further information, knowledgebase and technical support.

For more information on dLive setup and mixing functions please refer to the dLive Firmware Reference

Guide available for download at www.allen-heath.com.

 Check for the latest version of this Getting Started Guide.

You can also join our Allen & Heath Digital Community to share knowledge and information with other dLive

users.

General precautions

• Protect the equipment from damage through liquid or dust contamination. Cover the MixRack when

it is not being used for a long period.

• If the equipment has been stored in sub-zero temperatures allow time for it to reach normal

operating temperature before use at the venue. Recommended operating temperature is 0 to 35

degrees Celsius.

• Avoid using the equipment in extreme heat and direct sunlight. Make sure the ventilation slots are

not obstructed and that there is adequate air movement around the equipment.

• Clean the equipment with a soft brush and dry lint-free cloth. Do not use chemicals, abrasives or

solvents.

• It is recommended that servicing is carried out only by an authorised Allen & Heath agent. Contact

details for your local distributor can be found on the Allen & Heath website. Allen & Heath do not

accept liability for damage caused by maintenance, repair or modification by unauthorised

personnel.

Register your product

Register your product online at www.allen-heath.com/register.