POWERLINE

DC/DC-Converter

Thermal Impedance

Natural convection

12°C/Watt

(see Note 8)

Natural convection with Heat Sink

10°C/Watt

Thermal Shock

MIL-STD-810D

Vibration

10-55Hz, 2G, 30 Min. along X, Y and Z

Relative Humidity

5% to 95% RH

Case Material

Nickel plated copper

Base Material

Non-conductive black plastic

Potting Material

Epoxy (UL94-V0)

Conducted Emissions (see Note 11)

EN55022

Level A

Radiated Emissions

EN55022

Level A

ESD

EN61000-4-2

Perf. Criteria 2

Radiated Immunity

EN61000-4-3

Perf. Criteria 2

Fast Transient

EN61000-4-4

Perf. Criteria 2

Surge

EN61000-4-5

Perf. Criteria 2

Conducted Immunity

EN61000-4-6

Perf. Criteria 2

Weight

27g

Dimensions

50.8 x 25.4 x 10.2mm

MTBF (see Note 2)

RP10-S_DE

Series

Notes :

1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.

Operation under no-load condition will not damage these devices, however they may not meet all listedspecification.

2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).

3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.

4. Maximum value at nominal input voltage and full load of standard type.

5. Typical value at nominal input voltage and full load.

6. Test by minimum Vin and constant resistor load.

7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.

Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SE/P)

Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SE/N).

If no suffix is specified, the control pin will be omitted.

8. Heat sink is optional and P/N: 7G-0020A.

9. The M1 version (RP10-xxxxSE/M1, RP10-xxxxDE/M1) does not carry the UL certification.

10.M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.

11. See application notes for EMI-filtering.

July-2006

www.recom-international.com

222