| Os motores de busca de Datasheet de Componentes eletrônicos |
|
UPB587G Folha de dados(PDF) 2 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPB587G Folha de dados(HTML) 2 Page - NEC |
|
2 / 5 page ![]() ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS VCC1, VCC2 Supply Voltage V -0.5 to 4.0 VIN, VM Input Voltage, Ratio Control Voltage V -0.5 to VCC + 0.5 PIN Input Power dBm +10 PT Power Dissipation UPB587B W 1.5 (TA = +125 °C) UPB587G mW 250 (TA = +85 °C) TOP Operating Temperature UPB587B °C -55 to +125 UPB587G °C -40 to +85 TSTG Storage Temperature UPB587B °C -65 to +200 UPB587G °C -65 to +150 UPB587B, UPB587G FREQUENCY RESPONSE (DIVIDE-BY-2 @ TA = 25 °C) Frequency, f (GHz) Frequency, f (GHz) FREQUENCY RESPONSE (DIVIDE-BY-2 @ VCC = 2.2 V) SYMBOL PARAMETER UNITS RATINGS VCC1, VCC2 Supply Voltage V 2.2 to 3.5 TOP Operating Temperature °C -20 to +75 RECOMMENDED OPERATING CONDITIONS Note: Because of the high internal gain and gain compression of the UPB587, this device is prone to self-oscillation in the absence of an RF input signal. If the device will be used in an application where DC power will be applied in the absence of an RF input signal, this self-oscillation can be suppressed by any of the following means: * Add a shunt resistor from the RF input line to ground. The blocking capacitor should be between the resistor and the UPB587, but physical separation should be minimized. Typically a resistor value between 50 and 100 ohms will suppress the self- oscillation. * Apply a DC offset voltage of +2.0 volts to the INPUT pin. The voltage source should be isolated from the INPUT pin by a series 1000 ohm resistor. * Apply a DC offset voltage of +1.0 volts to the BYPASS pin. The voltage source should be isolated from the BYPASS pin by a series 1000 ohm resistor. All these approaches reduce the input sensitivity of the UPB587 (by as much as 3 dB for the example of a 50 ohm shunt resistor), but otherwise have no affect on the reliability or other electrical characteristics of this device. Frequency, f (GHz) FREQUENCY RESPONSE (DIVIDE-BY-4 @ TA = 25 °C) Frequency, f (GHz) FREQUENCY RESPONSE (DIVIDE-BY-4 @ VCC = 2.2 V) Guaranteed Operating Window * TYPICAL PERFORMANCE CURVES (TA = 25 °C unless otherwise noted) Note: 1. Operation in excess of any one of these parameters may result in permanent damage. VCC = 2.2 V 3.0 V 3.5 V +10 0 -10 -20 -30 -40 -50 -60 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 G* O W 10 0 -10 -20 -30 -40 -50 -60 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 TA = +75˚C +25˚C -20˚C G* O W +10 0 -10 -20 -30 -40 -50 -60 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VCC = 2.2 V 3.0 V 3.5 V G * O W TA = +75˚C +25˚C -20˚C +10 0 -10 -20 -30 -40 -50 -60 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 G * O W |
|
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |