CS42L52 datasheet(39/82 Pages) CIRRUS

Nome de Peças	CS42L52

Descrição Electrónicos	Low Power, Stereo CODEC w/Headphone & Speaker Amps

PDF	82 Pages

Scroll/Zoom	100%

Fabricante Electrônico	CIRRUS [Cirrus Logic]

Página de início	http://www.cirrus.com

Logo

39 / 82 page

DS680A1

CS42L52

Send MAP byte, auto-increment off.

Receive acknowledge bit.

Send stop condition, aborting write.

Send start condition.

Send 10010101 (chip address & read operation).

Receive acknowledge bit.

Receive byte, contents of selected register.

Send acknowledge bit.

Send stop condition.

Setting the auto-increment bit in the MAP allows successive reads or writes of consecutive registers. Each

byte is separated by an acknowledge bit.

4.11.2 Memory Address Pointer (MAP)

The MAP byte comes after the address byte and selects the register to be read or written. Refer to the

pseudo code above for implementation details.

4.11.2.1 Map Increment (INCR)

The device has MAP auto-increment capability enabled by the INCR bit (the MSB) of the MAP. If INCR is

set to 0, MAP will stay constant for successive I²C writes or reads. If INCR is set to 1, MAP will auto-in-

crement after each byte is read or written, allowing block reads or writes of successive registers.

CS42L52 Folha de dados(PDF) 39 Page - Cirrus Logic