| Os motores de busca de Datasheet de Componentes eletrônicos |
|
HC705RC17GRS/D Folha de dados(PDF) 21 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
HC705RC17GRS/D Folha de dados(HTML) 21 Page - NXP Semiconductors |
|
21 / 126 page ![]() General Description Signal Description MC68HC705RC17 — Rev. 2.0 General Release Specification General Description An external clock should be applied to the OSC1 input with the OSC2 pin not connected (see Figure 1-4 (b)). This setup can be used if the user does not want to run the CPU with a crystal. NOTE: The PLL design requires a 32.768-kHz external frequency for proper operation. Figure 1-4. Oscillator Connections 1.5.4 RESET This active-low pin is used to reset the MCU to a known startup state by pulling RESET low. The RESET pin contains an internal Schmitt trigger as part of its input to improve noise immunity. See Section 5. Resets. 1.5.5 LPRST The LPRST pin is an active-low pin and is used to put the MCU into low- power reset mode. In low-power reset mode the MCU is held in reset with all processor clocks halted. See Section 5. Resets. < OSC1 OSC2 OSC1 OSC2 MCU MCU EXTERNAL CLOCK UNCONNECTED (a) Crystal/Ceramic Resonator (b) External Clock Source 10 M Ω Oscillator Connections Connections 30 pF 30 pF Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |