Silan

Microelectronics

SD670XSC_Datasheet

CAUTION

ELECTROSTATIC

SENSITIVE DEVICE

DO NOT OPEN OR HANDLE

EXPECT AT A STATIC-FREE

WORKSTATION

MOS DEVICES OPERATE NOTES:

Electrostatic charges may exist in many things. Please take following preventive measures to prevent effectively the

MOS electric circuit as a result of the damage which is caused by discharge:

Disclaimer :



The operator must put on wrist strap which should be earthed to against electrostatic.



Equipment cases should be earthed.



All tools used during assembly, including soldering tools and solder baths, must be earthed.



MOS devices should be packed in antistatic/conductive containers for transportation.

•

Silan reserves the right to make changes to the information herein for the improvement of the design and performance without

prior notice! Customers should obtain the latest relevant information before placing orders and should verify that such

information is complete and current.

•

All semiconductor products malfunction or fail with some probability under special conditions. When using Silan products in

system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety standards

strictly and take essential measures to avoid situations in which a malfunction or failure of such Silan products could cause

loss of body injury or damage to property.

•

Silan will supply the best possible product for customers!

HANGZHOU SILAN MICROELECTRONICS CO.,LTD

Rev.:1.2

http: //www.silan.com.cn

Page 7 of 8