Datasheet

6

Rev. 1.11

2019-09-19

High Speed CAN Transceiver

TLE9251V

General product characteristics

4

General product characteristics

4.1

Absolute maximum ratings

Note:

Stresses above the ones listed here may cause permanent damage to the device. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability. Integrated

protection functions are designed to prevent IC destruction under fault conditions described in the

data sheet. Fault conditions are considered as “outside” normal-operating range. Protection

functions are not designed for continuos repetitive operation.

Table 2

Absolute maximum ratings voltages, currents and temperatures1)

All voltages with respect to ground; positive current flowing into pin;

(unless otherwise specified)

1) Not subject to production test, specified by design

Parameter

Symbol

Values

Unit Note or

Test Condition

Number

Min.

Typ. Max.

Voltages

Transmitter supply voltage

VCC

-0.3

–

6.0

V

–

P_8.1.1

Digital supply voltage

VIO

-0.3

–

6.0

V

–

P_8.1.2

CANH and CANL DC voltage

versus GND

VCANH

-40

–

40

V

–

P_8.1.3

Differential voltage between

CANH and CANL

VCAN_Diff

-40

–

40

V

–

P_8.1.4

Voltages at the digital I/O pins:

STB, RxD, TxD

VMAX_IO1

-0.3

–

6.0

V

–

P_8.1.5

Voltages at the digital I/O pins:

STB, RxD, TxD

VMAX_IO2

-0.3

–

VIO +0.3 V

–

P_8.1.6

Currents

RxD output current

IRxD

-5

–

5

mA –

P_8.1.7

Temperatures

Junction temperature

Tj

-40

–

150

°C

–

P_8.1.8

Storage temperature

TS

-55

–

150

°C

–

P_8.1.9

ESD Resistivity

ESD immunity at CANH, CANL

versus GND

VESD_HBM_CAN -8

–

8

kV

HBM

(100 pF via 1.5 kΩ)2)

2) ESD susceptibility, Human Body Model “HBM” according to ANSI/ESDA/JEDEC JS-001

P_8.1.11

ESD immunity at all other pins VESD_HBM_ALL -2

–

2

kV

HBM

(100 pF via 1.5 kΩ)2)

P_8.1.12

ESD immunity all pins

VESD_CDM

-750

–

750

V

CDM3)

3) ESD susceptibility, Charge Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1

P_8.1.13