DA9155M datasheet(24/38 Pages) RENESAS

Nome de Peças	DA9155M

Descrição Electrónicos	2.5 A Companion Charger for Rapid Charging

PDF	38 Pages

Scroll/Zoom	100%

Fabricante Electrônico	RENESAS [Renesas Technology Corp]

Página de início	http://www.renesas.com

Logo

24 / 38 page

DA9155M

2.5 A Companion Charger for Rapid Charging

Datasheet

Revision 3.2

25-Feb-2022

CFR0011-120-00 Rev 5

24 of 37

The junction temperature monitoring is also enabled in the reset mode. If a junction over-temperature

is detected during operation (TJUNC

≥ TJUNC_POR), DA9155M moves back to the reset mode.

10.8.3

Disabled

In the disabled mode DA9155M is fully functional but the Buck has not been enabled. An event is

fired when entering the disabled mode to notify the application processor that the slave charger is

ready for operation. If a fault condition exists (TJUNC, VBAT, or VIN), the enable signal is blocked,

DA9155M stays in the disabled mode, and an event is triggered.

DA9155M moves to the active mode when the Buck is enabled either by asserting the EN signal or

by setting the BUCK_EN register.

10.8.4

Active

In the active mode DA9155M is fully functional and the Buck is running.

DA9155M moves back to the disabled mode if the Buck is disabled, the safety timer expires, or if

there is a fault condition (TJUNC, VBAT, or VIN).

DA9155M Folha de dados(PDF) 24 Page - Renesas Technology Corp