www.ct-micro.com

© 2022 CT MICRO INTERNATIONAL CORPORATION

Rev.3

ALL RIGHTS RESERVED.

Page 13

Nov, 2022

CTS480

High CMR Intelligent Power Module and Gate Drive

Interface Optocoupler

Solderability spec (Follow the JEDEC standard JESD22-B102)

Reflow Soldering: Immersed surface, other than the end of pin as cut-surface, must be covered by

solder.

Solder-Bath: More than 95% of the electrode must be covered with solder.

Wave soldering (Follow the JEDEC standard JESD22-A111)

One time soldering is recommended within the condition of temperature.

Temperature: 260+0/-

5˚C.

Time: 10 sec.

Preheat temperature:

25 to 140˚C.

Preheat time: 30 to 80 sec.

Iron soldering (Follow the standard MIL-STD 202G, Method 210F)

Allow single lead soldering in every single process.

One time soldering is recommended. Temperature: 350±10˚C

Time: 5 sec max.