®

4

HSH SERIES

1.5 WATT

TEST

HSH

HSH

STANDARD

/ES

PRE-CAP INSPECTION

Method 2017, 2032

yes

yes

TEMPERATURE CYCLE (10 times)

Method 1010, Cond. C, -65°C to 150°C

no

no

Method 1010, Cond. B, -55°C to 125°C

no

yes

CONSTANT ACCELERATION

Method 2001, 3000 g

no

no

Method 2001, 500 g

no

yes

BURN-IN

24 hours at 150°C case (typical)

yes

no

96 hours at 150°C case (typical)

no

yes

FINAL ELECTRICAL TEST MIL-PRF-38534, Group A

Subgroups 1, 2, 4, 5: +25°C, +125°C

yes

yes

HERMETICITY TESTING

Fine Leak, Method 1014, Cond. A

no

yes

Gross Leak, Method 1014, Cond. C

no

yes

yes

no

FINAL VISUAL INSPECTION

Method 2009

yes

yes

Test methods are referenced to MIL-STD-883 as determined by MIL-PRF-38534.

HSH1205D Rev C (25°C eff.). This revision supercedes all previous releases.

All technical information is believed to be accurate, but no responsibility is assumed

for errors or omissions. Interpoint reserves the right to make changes in products

or specifications without notice. HSH Series is a trademark of Interpoint. Copyright

© 2003-2004 Interpoint Corporation. All rights reserved.

Contact Information:

Interpoint USA

Phone:

1-800-822-8782

+425-882-3100

Email:

power@intp.com

www.interpoint.com

Interpoint UK

Phone:

+44-1252-872266

Email:

poweruk@intp.com

Interpoint France

Phone:

+33-134285455

Email:

powerfr@intp.com