2

Maximum ratings and operating conditions

Symbol

Parameter

Value

Unit

VCC(1)

Maximum analog power supply between VCC and GND

-0.3 to 4.8

V

Vi

LVCMOS inputs (operating or cold-spare)

-0.3 to 4.8

V

VOUT

LVDS outputs and LVCMOS outputs (operating or cold-spare)

-0.3 to 4.8

V

VCM

LVDS common mode (operating or cold-spare)

-5 to +6

V

Maximum temperature storage

-65 to +150

°C

Maximum junction temperature

+150

°C

Junction-to-ambient thermal resistance (Ɵja)

80

°C/W

Junction-to-case thermal resistance (Ɵjc)

17

°C/W

ESD

HBM (human body model), LVDS inputs and outputs vs pin 5, 6, 11, 16

8 k

V

HBM on all pins except LVDS inputs and outputs

2 k

CDM (charged device model)

1 k

1. All voltages, except differential I/O bus voltage, are with respect to the network ground terminal.

2. Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions as

per the method 5004 of MIL-STD-883.

3. Short-circuits can cause excessive heating.

Note:

Absolute maximum ratings are those values beyond which damage to the device may occur. Functional

operation under these conditions is not implied. All values are referred to GND.

Symbol

Parameter

Min.

Max.

Unit

VCC

Supply voltage

3

3.6

V

VCM

Static common mode on the receiver

-4

+4

V

VIN

Driver DC input voltage (LVCMOS inputs)

0

3.6

V

Ambient temperature range

-40

+125

°C

Note:

All unused inputs must be held at VCC or GND to ensure proper device operation.

LEOLVDSRD

Maximum ratings and operating conditions

DS13673 - Rev 4

page 5/23