MPFS250T datasheet(39/50 Pages) MICROCHIP

Nome de Peças	MPFS250T

Descrição Electrónicos	PolarFire® SoC Product Overview

PDF	50 Pages

Scroll/Zoom	100%

Fabricante Electrônico	MICROCHIP [Microchip Technology]

Página de início	http://www.microchip.com

Logo

39 / 50 page

5.2.1

Dedicated SPI Programming Port

To facilitate the use of various programming modes, PolarFire SoC FPGAs share dedicated SPI port pins between

the system controller and user logic embedded in the FPGA. User logic must instantiate the User SPI macro to gain

access to the pins from their design. The SPI port pins can be used as a master or slave programming port based

on the signal level on the dedicated SPI mode pin. The dedicated SPI Enable pin also allows an external SPI master

to program the on-board SPI flash without an external MUX by tri-stating the SPI MOSI/MISO/SS/CLK pins on the

PolarFire SoC FPGA.

The following illustration shows the SPI port facilitating the use of various programming modes.

Figure 5-1. SPI Programming Port

FPGA Fabric

System Controller

SPI Port Pins

MISO/MOSI/SS/CLK

SPI Enable

SPI Mode

SPI

Flash

External

SPI

Master

PolarFire® SoC FPGA

System Controller

and its subsidiaries

Overview

DS60001656C-page 39

MPFS250T Folha de dados(PDF) 39 Page - Microchip Technology