INPUT TERMINALS

(4X)STANDOFF

GROUND STUD

INSULATOR

OUTPUT TERMINALS

.6)

Rev. 11.07.05

LPX50 Enclosure

1of 2

Embedded Power for

Business-Critical Continuity

LPX50

Enclosure

Installation Notes

LPX50 • Cover Enclosure Kit

LPX50 will fit the LPX5X power supplies.

Materials

1 Base

1 Cover

4 M3X6mm Pan head screws

with spring washer

4 M3X6mm countersunk

screws

1 M4 nut

1 M4 star washer

1 M4 spring washer

1 Plastic insulator sheet

Notes

1. All dimensions are in inches (mm)

2.Overall dimensions: 4.685 (119.0) x 2.945 (74.8) x 1.693 (43.0)

3.Base plate has three sets of customer mountings:

a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)

b. Bottom mounting (2X) 4mm clear holes plus 2 keyways. (see keyway detail)

c. Side mountings (4X) M3 inserts. Max. screw penetration 0.236 (6mm)

4.Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and

clearances.

5.Ensure base is firmly connected to supply earth via the earth stud marked

6.When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are

complied with, in respect to creepage and clearance distances, and distances through

insulation.