Application Note

5

<Revision 1.0>

<2017-05-22>

Eval-M1-CM610N3

iMOTION™ Modular Application Design Kit

Main features

3

Main features

Eval-M1-CM610N3 is an evaluation board for motor drive applications based on a 3-phase IPM. Combined in a

kit with one of the available MADK control board options, it demonstrates Infineon's IPM technology for motor

drives. The kit demonstrates Infineon’s IPM technology for motor drives.

Main features of CIPOS™ Mini IPM IKCM10H60GA are:

• TRENCHSTOP™ IGBTs

• Fully isolated Dual In-Line molded module

• Rugged SOI gate driver technology with stability against transient and negative voltages

• Integrated bootstrap functionality

• Overcurrent shutdown

• Temperature monitoring

• Undervoltage lockout at all channels

• Low side emitter pins accessible for phase current monitoring in open emitter configuration

• Cross conduction prevention

• All six switches turn off during protection

• Lead-free terminal plating; RoHS compliant

The evaluation board characteristics are:

• Maximum 750 W motor power output

• On board EMI filter

• Current sensing for each phase configured by default

• Overcurrent protection

• Overtemperature hardware protection

• Sensing of DC-link voltage

• Thermistor output

• Fault diagnostic output

• Measurement test-points compatible to standard oscilloscope probes

• PCB is 120 mm x 120 mm and has two layers with 35 µm copper each

• RoHS complaint