PI3B3257ZHDEX datasheet(2/8 Pages) DIODES

2 / 8 page

A product Line of

Diodes Incorporated

PI3B3257

www.diodes.com

April 2018

Diodes Incorporated

PI3B3257

Document Number DS40430 Rev 2-2

Notes:

This parameter is determined by device characterization but is not production tested.

Storage Temperature .....................................................................–65°C to +150°C

Ambient Temperature with Power Applied ....................................–40°C to +85°C

Supply Voltage to Ground Potential.................................................–0.5V to +4.6V

DC Input Voltage .............................................................................–0.5V to +4.6V

DC Output Current........................................................................................ 120mA

Power Dissipation ............................................................................................ 0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGSmaycausepermanentdamagetothedevice.

This is a stress rating only and functional operation of

the device at these or any other conditions above those

indicatedintheoperationalsectionsofthisspecification

is not mplied. Exposure to absolute maximum rating

conditions for extended periods may affect reliability.

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.3V ±10%)

Parameters

Description

Test Conditions(1)

Min.

Typ.(2)

Max.

Units

VIH

Input HIGH Voltage

Guaranteed Logic HIGH Level

VIL

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

0.8

IIH

Input HIGH Current

VCC = Max., VIN = VCC

±1

µA

IIL

Input LOW Current

VCC = Max., VIN = GND

±1

IOZH

High Impedance Output Current 0 ≤ In, Yn ≤ VCC

±1

VIK

Clamp Diode Voltage

VCC = Min., IIN = –18mA

–1.2

RON

Switch On-Resistance(3)

VCC = Min., VIN = 0.0V,

Ion = 48mA or 64mA

Ω

VCC = Min., VIN = 2.4V, ION = 15mA

Capacitance (TA = 25°C, f = 1 MHz)

Parameters(1) Description

Test Conditions

Typ.

Units

CIN

Input Capacitance

VIN = 0V

3.0

COFFYN

YN Capacitance, Switch OFF

17.0

COFFIN

IN Capacitance, Switch OFF

8.5

CON

IN/YN Capacitance, Switch ON

Notes:

For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

Typical values are at VCC = 3.3V, TA = 25°C ambient and maximum loading.

Measured by the voltage drop between I and Y pin at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the two

(I,Y) pins.

Notes:

For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.

Typical values are at VCC = 3.3V, +25°C ambient.

Per TTL driven input (control inputs only); I and Y pins do not contribute to ICC.

This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The I and Y inputs

generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design.

Power Supply Characteristics

Parameters

Description

Test Conditions(1)

Min. Typ.(2) Max.

Units

ICC

Quiescent Power Supply Current

VCC = Max.

VIN = GND or VCC

0.1

3.0

µA

∆ICC

Supply Current per Input @ TTL

HIGH(3, 4)

VCC = Max.

VIN = 3.0

750

PI3B3257ZHDEX Folha de dados(PDF) 2 Page - Diodes Incorporated

PI3B3257ZHDEX Folha de dados(HTML) 2 Page - Diodes Incorporated

Html Pages

1 2 3 4 5 6 7 8

Folha de dados Download

Ligação URL