 |
Os motores de busca de Datasheet de Componentes eletrônicos |
|
|
Os motores de busca de Datasheet de Componentes eletrônicos |
|
STUSB1602 Folha de dados(PDF) 12 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STUSB1602 Folha de dados(HTML) 12 Page - STMicroelectronics |
|
|
12 / 39 page  • The device is configured in source power role • VCONN power switches are enabled • A valid connection to a sink is achieved • Ra presence is detected on the unwired CC pin • A valid power source is applied to the VCONN pin with respect to a predefined UVLO threshold The STUSB1602 does not provide VCONN when it is in sink power role. 3.4.3 VCONN monitoring The VCONN monitoring block detects if VCONN power supply is available on the VCONN pin. It is used to check that VCONN voltage is above a pre-defined undervoltage lockout (UVLO) threshold to allow the enabling of the VCONN power switches. The default value of the UVLO threshold is 4.65 V typical for powered cables operating at 5 V. This value can be changed by software to 2.65 V typical to support VCONN-powered accessories that operate down to 2.7 V. 3.4.4 VCONN discharge The behavior of Type-C FSMs is extended to an internal VCONN discharge path capability on the CC pins in source power mode only. The discharge path is activated during 250 ms from sink detachment detection. This feature is disabled by default. It can be activated through NVM programming (see Section 6 Start-up configuration) and also by software through the I²C interface. 3.4.5 VCONN control and status The supplying conditions of VCONN across the STUSB1602 are managed through the I²C interface. Different I²C registers and bits are used specifically for this purpose. 3.4.6 VCONN power switches Features The STUSB1602 integrates two current limited high-side power switches with protection that tolerates high voltage up to 22 V on the CC pins. Each VCONN power switch presents the following features: • Soft-start to limit inrush current • Constant current mode overcurrent protection • Adjustable current limit • Thermal protection • Undervoltage and overvoltage protections • Reverse current and reverse voltage protections STUSB1602 VCONN supply DS11254 - Rev 5 page 12/39 |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Portuguese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
