MDEV-868-PRC datasheet(2/55 Pages) LINX

2 / 55 page

Table of Contents

Description

Features

Ordering Information

Absolute Maximum Ratings

Electrical Specifications

Typical Performance Graphs

Pin Assignments

Pin Descriptions

Module Dimensions

Theory of Operation

Module Description

Transceiver Operation

Transmit Operation

Receive Operation

System Operation

Polite Spectrum Access

ETSI Compliance

Addressing Modes

Reading the Transmitter Address

Restore Factory Defaults

AES Encryption

The Join Process

Operation with the HumPROTM Series

Carrier Sense Multiple Access (CSMA)

Acknowledgement

External Amplifier Control

Configuring the Status Lines

Using the LATCH_EN Line

Using the MODE_IND Line

Warning: Some customers may want Linx radio frequency (“RF”)

products to control machinery or devices remotely, including machinery

or devices that can cause death, bodily injuries, and/or property

damage if improperly or inadvertently triggered, particularly in industrial

settings or other applications implicating life-safety concerns (“Life and

Property Safety Situations”).

NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE

SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY

SITUATIONS. No OEM Linx Remote Control or Function Module

should be modified for Life and Property Safety Situations. Such

modification cannot provide sufficient safety and will void the product’s

regulatory certification and warranty.

Customers may use our (non-Function) Modules, Antenna and

Connectors as part of other systems in Life Safety Situations, but

only with necessary and industry appropriate redundancies and

in compliance with applicable safety standards, including without

limitation, ANSI and NFPA standards. It is solely the responsibility of any

Linx customer who uses one or more of these products to incorporate

appropriate redundancies and safety standards for the Life and

Property Safety Situation application.

Do not use this or any Linx product to trigger an action directly

from the data line or RSSI lines without a protocol or encoder/

decoder to validate the data. Without validation, any signal from

another unrelated transmitter in the environment received by the module

could inadvertently trigger the action.

All RF products are susceptible to RF interference that can prevent

communication. RF products without frequency agility or hopping

implemented are more subject to interference. This module does have

a frequency hopping protocol built in, but the developer should still be

aware of the risk of interference.

Do not use any Linx product over the limits in this data guide.

Excessive voltage or extended operation at the maximum voltage could

cause product failure. Exceeding the reflow temperature profile could

cause product failure which is not immediately evident.

Do not make any physical or electrical modifications to any Linx

product. This will void the warranty and regulatory and UL certifications

and may cause product failure which is not immediately evident.

MDEV-868-PRC Folha de dados(PDF) 2 Page - Linx Technologies

MDEV-868-PRC Folha de dados(HTML) 2 Page - Linx Technologies

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Folha de dados Download

Ligação URL