AS1130 datasheet(42/66 Pages) AMSCO

42 / 66 page

Page 42

ams Datasheet

Document Feedback

[v2-01] 2016-Oct-12

AS1130 − Register Description

Current Source Register (0x05)

Within this registers the current for every single LED can be set

from 0mA to 30mA in 255 steps (8 bits). Per default this register

is set to 0x00.

Figure 44:

Current Source Register Format

AS1130 Config Register (0x06)

Per default this register is set to 0x00.

Figure 45:

AS1130 Config Register Format

0x05 Current Source Register

Bit

Bit Name

Default

Access

Bit Description

7:0

current

00000000

R/W

00000000: 0mA

..........

11111111: 30mA

0x06 AS1130 Config Register

Bit

Bit Name

Default

Access

Bit Description

7low_vdd_rst

R/W

0: At the end of a movie or a display picture the “low_

VDD” flag is not changed

1: At the end of a movie or a display picture, the “low_

VDD” flag is set to “0”

low_vdd_stat

R/W

This bit indicates the supply status

0: If low_VDD is detected, the Interrupt Status

triggered.

1: The low_VDD bit is directly mapped to the pin IRQ.

This can be used to control an external DC/DC

Converter or Charge Pump. In this case pin IRQ

cannot be used for interrupt functionality, the

Interrupt Status Register will be updated accordingly.

led_error_

correction

0R/W

This bit defines the LED open handling

0: Open LEDs which are detected at LED open test,

are NOT disabled

1: Open LEDs which are detected at LED open test,

are disabled

dot_corr

R/W

Analog current DotCorrection(1)

0: Disabled

1: Enabled

AS1130 Folha de dados(PDF) 42 Page - ams AG

AS1130 Folha de dados(HTML) 42 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Folha de dados Download

Ligação URL