Preliminary Technical Data

ADCMP580/ADCMP581/ADCMP582

Rev. PrA | Page 5 of 16

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

SUPPLY VOLTAGES

Positive Supply Voltage

−0.5 V to +6.0 V

Negative Supply Voltage

–6.0 V to +0.5 V

Logic Supply Voltage

−0.5 V to +6.0 V

INPUT VOLTAGES

Input Voltage

−3.0 V to +4.0 V

Differential Input Voltage

−2.5 V to +2.5 V

Input Voltage, Latch Enable

−2.5 V to +5.5 V

HYSTERESIS CONTROL PIN

−5.5 V to +0.5 V

Maximum Input/Output Current

1 mA

OUTPUT CURRENT

ADCMP580 (CML)

−25 mA

ADCMP581 (NECL)

−40 mA

ADCMP582 (PECL)

−40 mA

TEMPERATURE

Operating Temperature, Ambient

−40°C to +85°C

Operating Temperature, Junction

125°C

Storage Temperature Range

−65°C to +150°C

ESD CAUTION

THERMAL CONSIDERATIONS

The ADCMP580/ADCMP581/ADCMP582 LFCSP 16-lead

resistance) of 70°C/W in still air.

Stress above those listed under Absolute Maximum Ratings may

cause permanent damage to the device. This is a stress rating

only and functional operation of the device at these or any other

conditions above those indicated in the operational sections of

this specification is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect device

reliability.

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.