SparkFun moto:bit - micro:bit Carrier Board (Qwiic)

DEV-15713

The SparkFun moto:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the

micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple,

beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard each

moto:bit are multiple I/O pins, as well as a vertical Qwiic connector, capable of hooking up servos,

sensors and other circuits. At the flip of the switch you can get your micro:bit moving!

The moto:bit connects to the micro:bit via an updated SMD, edge connector at the top of the board,

making setup easy. This creates a handy way to swap out micro:bits for programming, while still

providing reliable connections to all of the different pins on the micro:bit. We have also included a

basic barrel jack on the moto:bit that is capable of providing power to anything you connect to the

carrier board.

The micro:bit is a pocket-sized computer that lets you get creative with digital technology. Between

the micro:bit and our shield-like bit boards you can do almost anything while coding, customizing and

controlling your micro:bit from almost anywhere! You can use your micro:bit for all sorts of unique

creations, from robots to musical instruments and more. At half the size of a credit card, this versatile

board has vast potential!

Note: The SparkFun moto:bit does NOT include a micro:bit board. The micro:bit will need to be

purchased separately.