USB7006 datasheet(28/55 Pages) MICROCHIP

28 / 55 page



2021 Microchip Technology Inc.

DS00003715A-page 28

USB7006

6.0

DEVICE CONFIGURATION

The device supports a large number of features (some mutually exclusive), and must be configured in order to correctly

function when attached to a USB host controller. Microchip provides a comprehensive software programming tool,

MPLAB Connect Configurator (formerly ProTouch2), for OTP configuration of various USB7006 functions and registers.

All configuration is to be performed via the MPLAB Connect Configurator programming tool. For additional information

on this tool, refer to the MPLAB Connect Configurator programming tool product page at http://www.microchip.com/

design-centers/usb/mplab-connect-configurator.

Additional information on configuring the USB7006 is also provided in the “Configuration of the USB70xx” application

note, which contains details on the hub operational mode, SOC configuration stage, OTP configuration, USB configu-

ration, and configuration register definitions. This application note, along with additional USB7006 resources, can be

found on the Microchip USB7006 product page at www.microchip.com/USB7006.

Note:

Device configuration straps and programmable pins are detailed in Section 3.3, Configuration Straps and

Programmable Functions.

Refer to Section 7.0, Device Interfaces for detailed information on each device interface.

USB7006 Folha de dados(PDF) 28 Page - Microchip Technology