MAX77650 datasheet(6/27 Pages) MAXIM

6 / 27 page

Maxim Integrated │ 6

www.maximintegrated.com

Evaluates: MAX77650/MAX77651

MAX77650/MAX77651 Evaluation Kit

Table 1. Default Shunt Positions and Jumper Descriptions

REFERENCE

DESIGNATOR

DEFAULT

POSITION

FUNCTION

J100

N/A

Do not connect shunts to J100.

J101

1-2

1-2: Connects a VIO to the 1.8V EVKIT logic rail.

3-4: Connects a VIO to the 3.3V EVKIT logic rail.

5-6: Connects a VIO to the LDO output.

J200

1-2

1-2: Connects the U200 amplifier to the gate of the Q200 load FET.

J201

1-2

1-2: Connects VSBB0 to the on-board ADC.

J202

1-2

1-2: Connects the U201 amplifier to the gate of the Q201 load FET.

J203

1-2

1-2: Connects VSBB1 to the on-board ADC.

J204

1-2

1-2: Connects the U202 amplifier to the gate of the Q202 load FET.

J205

1-2

1-2: Connects VSBB2 to the on-board ADC.

J206

1-2

1-2: Connects the U203 amplifier to the gate of the Q203 load FET.

J207

1-2

1-2: Connects VLDO to the on-board ADC.

J208

1-2

1-2: Connects the on-board ammeter to GND.

2-3

1-2: Connects GPIO to VIO.

2-3: Connects GPIO to GND.

N/A

1-2: Connects PWR_HLD to VIO.

2-3: Connects PWR_HLD to GND.

2-3

1-2: Connects EN to SW1.

2-3: Connects EN to SW2.

1-3

1-2: Connects the THM pin to the divider through the potentiometer (R12).

1-3: Connects the THM pin to the divider through the on-board thermistor.

1-4: Connects the THM pin to the divider through a 10k resistor.

1-2

1-2: Connects RST to PWR_HLD through a 150Ω resistor.

J10

N/A

1-2: Connects VUSB (voltage from USB input on J6) to VCHGIN.

MAX77650 Folha de dados(PDF) 6 Page - Maxim Integrated Products

MAX77650 Folha de dados(HTML) 6 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Folha de dados Download

Ligação URL