| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MAXIMMINIQUSB Folha de dados(PDF) 1 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
MAXIMMINIQUSB Folha de dados(HTML) 1 Page - Maxim Integrated Products |
|
1 / 13 page ![]() Evaluates: MAX77818 MAX77818 EV System General Description The MAX77818 evaluation system (EV system) consists of a MAX77818 evaluation kit (EV kit) and a companion Maxim MINIQUSB interface board. The MAX77818 EV kit is an assembled and tested PC board that demonstrates the MAX77818. The IC contains 12V input and 3A output switching mode charger. The Maxim MINIQUSB interface board allows an IBM- compatible PC to use its USB port to emulate an I2C 2-wire interface. Windows XP®/Windows® 7 software provides a user-friendly interface to exercise the features of the MAX77818. The menu-driven program offers a graphical user interface with control buttons. Applications ● Smartphones and Tablets ● Other Handheld Devices Benefits and Features ● Demonstrates 12VCHGIN, 3A Charge ● Demonstrates m5 Fuel Gauge Performance ● Demonstrates Dual Input Charge ● Demonstrates OTG Mode ● Evaluates MAX77818 Detail Performances Ordering Information appears at end of data sheet. Windows and Windows XP are registered trademarks and registered service marks of Microsoft Corporation. 19-7687; Rev 1; 8/16 Required Equipment ● IBM PC-compatible computer capable of running Windows XP/Windows 7 ● PC with an unused USB port ● Standard Mini-USB cable to connect the computer’s USB port to the Maxim MINIQUSB interface board ● DC power supply capable of supplying 15.0V/3A Initial Test Setup Do not turn on the DC power supplies until all connections are made. 1) Carefully connect the boards by aligning the 20-pin connector of the MAX77818 EV kit with the 20-pin header of the MINIQUSB interface board. Gently press them together. The two boards should be flush against each other. 2) Connect a cable from the computer’s USB port to the MINIQUSB interface board. Use the USB cable that Maxim provides. 3) Install the MAXIM MINIQUSB driver when PC prompts USB device detection. 4) Connect a single cell Li-Ion battery to the pads labeled BATT+ and BATT-. 5) Connect the DC power supply capable of supplying 15V ±0.2V/3A to the pads labeled VBUS and GND on the MAX77818 EV board. 6) Turn on the 5V DC power supply. 7) Start the MAX77818 program by opening its icon in the Start menu. The MAX77818.EXE software pro- gram can be run from the hard drive using Windows. If desired, use the INSTALL.EXE program to copy the files and create icons for them in the Windows XP/ Window 7 Start menu. An uninstall program is included with the software. Click on the UNINSTALL icon to remove the EV kit software from the hard drive. 8) Observe as the program automatically detects the ad- dress of the MAX77818 and starts the main program. |
Nº de peça semelhante - MAXIMMINIQUSB |
|
Descrição semelhante - MAXIMMINIQUSB |
|
|
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |