SPL TL90AT08

Glossary

1)

Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse opera-

tion is not allowed.

2)

Thermal resistance: junction - soldering point, of the device only, mounted on an ideal heatsink (e.g.

metal block)

3)

Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-

es, the typical data or calculated correlations of technical parameters can only reflect statistical figures. 

These do not necessarily correspond to the actual parameters of each single product, which could dif-

fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.

because of technical improvements, these typ. data will be changed without any further notice.

4)

Testing temperature: TA = 25°C (unless otherwise specified)

5)

Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and 

dimensions are specified in mm.