AT25QL321 datasheet(27/79 Pages) DIALOG

Nome de Peças	AT25QL321

Descrição Electrónicos	32-Mbit, 1.7V Minimum SPI Serial Flash Memory with Dual I/O, Quad I/O and QPI Support

PDF	79 Pages

Scroll/Zoom	100%

Fabricante Electrônico	DIALOG [Dialog Semiconductor]

Página de início	http://www.dialog-semiconductor.com/

Logo

27 / 79 page

AT25QL321

DS-25QL321–131C–5/2017

Figure 7-18. Fast Read Quad I/O Instruction (Initial instruction or previous M7‐0 ≠ Axh, SPI mode)

Figure 7-19. Fast Read Quad I/O Instruction (previous M7‐0 = Axh, SPI mode)

Wrap Around in SPI mode

The Fast Read Quad I/O instruction can also be used to access specific portion within a page by issuing a “Set Burst

with Wrap” (77h) instruction prior Fast Read Quad I/O (EBh) instruction. The “Set Burst with Wrap” (77h) instruction can

either enable or disable the “Wrap Around” feature for the following Fast Read Quad I/O instruction.

When “Wrap Around” is enabled, the data being accessed can be limited to an 8/16/32/64-byte section of a 256-byte

page. The output data starts at the initial address specified in the instruction, once it reaches the ending boundary of the

8/16/32/64-byte section, the output will wrap around to the beginning boundary automatically until CS is pulled high to

terminate the instruction.

The Burst with Wrap feature allows applications that use cache to quickly fetch a critical address and then fill the

cache afterwards within a fixed length (8/16/32/64-byte) of data without issuing multiple read instructions.

(Please

refer to Section 7.31 Set Burst with Wrap).

AT25QL321 Folha de dados(PDF) 27 Page - Dialog Semiconductor